The UPR-100 ultrasonic programmable receiver delivers high-performance, multi-channel, analog-to-digital data conversion at a rate of 100 MSPS via the PCI bus. Specifically designed to handle the most rigorous ultrasonic inspection procedures, the UPR-100 employs a patented flexible data gating technique for limiting the signal recording to windows of interest thus streamlining the high-volume A/D conversion.
Features:
- Two symmetrical, full-featured data acquisition channels
- Basic 100 MSPS per channel
- 8 bits of 10, basic resolution
- Single-shot sampling rates:
- Normal: 16 mux per channel @ 8 bit/100 MSPS
- Double Dynamic Range: 8 mux per channel. @ 8x2 bit/100 MSPS
- Double Sample Rate: 8mux per channel @ 8 bit/200 MSPS
- Interleave capability up to 400 MSPS in any of the above modes (with reduced channel quantity)
- Analog bandwidth 45MHz (standard) or 90 MHz (HF)
- 50 dB dynamically variable gain (TCG) with 0.2 dB step
- 50 dB SNR at 20 MHz bandwidth
- 8 fixed filters; one variable
- Dynamic data gating for limiting the recording to windows of interest
- Up to 128 gates per A/D channel. Each gate contains time event and signal amplitude measurements
- 6 gate time event tags: time of threshold, time of positive or negative peak, and time of zero cross after each
- Internal or external clock & trigger. Internal measurement burst of 1 to 16 cycles from each trigger
- 32-bit PCI bus interface
- Remote pulser-preamplifier interfaces
|